Stocked Parts
Kewaskum's housing stock runs newer than a lot of what we see closer to West Bend - the median build year here is 1993, which puts most garages at 16 gauge steel sectional doors, factory-galvanized lift cables, and either torsion or extension spring setups depending on when the builder cut corners. That's a narrower window than towns still full of 1970s one-piece doors, and it means the cable diameter and drum sizing are more consistent house to house. We carry galvanized aircraft cable in the common Kewaskum-era sizes on the truck, along with the standard bottom fixtures and drum sets that match 90s-and-newer sectional doors. What we don't stock is oddball cable for older custom or one-piece doors - if your garage predates the newer builds around it, we may need to order that part, and we'll tell you that on the spot rather than guess.
What the Repair Takes
On a standard 7-foot or 8-foot sectional door with torsion springs, swapping a broken cable means releasing spring tension, pulling the drum, running new cable through the bottom bracket, and re-tensioning the door so both sides lift level. On extension-spring setups, common on some of the smaller garages built here in the early 90s, the job is faster - the cable runs straight to the pulley and doesn't require touching torsion tension at all. Either way we test the door under full weight before we leave, because a cable job that looks fine at the drum can still bind if the drums aren't seated evenly. We're driving the 7 miles out from West Bend for this, so we book it as a full visit rather than a quick stop - there's no Kewaskum branch, just a truck that comes when you call.
The Cost of This Job
We don't have a set number to publish here - the honest answer is that torsion-side cable work with a spring release costs more than a straight extension-cable swap, and we won't quote a fixed price without seeing the door. What we can tell you is that this isn't a job worth stretching out: a single frayed cable left alone usually takes the second cable down with it inside a season, once the door starts running unevenly. That turns a one-cable job into a two-cable job, plus drum wear.
How to Book
Call and tell us it's a cable repair in Kewaskum - we'll ask whether the door has torsion springs (a horizontal bar above the door) or extension springs (springs running along the top tracks), since that changes which parts we load before the drive out. There's no local office to swing by; we come from West Bend on a scheduled visit. See our Kewaskum garage door service page for what else we cover out this way, or check our West Bend cable repair page for the base rundown on how the repair itself works.
